Load cell & Signal amplifier Bundle (LRM-5KN)
-
Unit Price :USD 1190.00 - USD 1190.00 / Set(s)
-
Min. Order: 1 Set(s)
Max. Order: 100 Set(s)
-
Price :
Quantity Price Processing time 1-100 USD 1190 7 Days -
Quantity :Set(s)
-
Shipping Cost :
-
Total Price :
USD 1190 x 1 =
-
Item specifics
-
Model :
LRM-5KN
Load cell & Signal amplifier Bundle
(Tension & compression type)
(LRM series)
Signal Amplifier (AL-168)
| AL-168 signal strain gauge Amplifier is load cell amplifier, used to connect with strain gauge load cells, such as s type load cell, s beam load cell, tension load cell, button load cell, torque load cell... etc. The Amplifier output is 0 ~ ±10V. Zero offset range is ±0.25mV/V. Nonlinearity accuracy is ± 0.02% of Full Scale. |
Specifications
| Applied converter | Strain gauge type transducer |
| Bridge voltage | DC2.5V, DC5V, DC10V (within 30mA) |
| Rated output | Voltage ±10V |
| Zero adjust range | ±0.25mV/V(input conversion) |
| Sensitivity adjust | Type L : output 10V for input 1.00mV/V~5.00mV/V |
| Range(input sensitivity) | Type M : output 10V for input 0.50mV/V~2.50mV/V |
| | Type H : output 10V for input 0.35mV/V~0.70mV/V |
| Calibration value | 0.25mV/V, 0.5mV/V, 1mV/V(accuracy within ± 2%) |
| Terminal joint | 7.62mm pitch, M3 × L6, + head screw |
| Response frequency | Vessel type low bus. Filter |
| 2Hz(-3db) 10Hz(-3db) 100Hz(-3db) 1kHz(-3db) | |
| Nonlinearity | Within 0.02% F.S. |
| Influenced by temp. variation | Within 1 μ V/℃(input conversion) |
| Movement of zero point | Within 0.1%F.S./℃ |
| Sensitivity variation | |
| Used in temperature | -10 ~ 60℃ |
| Electric power source | AC100V ± 10%, 50/60Hz, about 5VA |
| (AC 220V is available) | |
| Dimensions(outside) | 44W × 92H × 110D without jutty |
| Weight | About 700g |
Tension &compression type load sensors
| LRM force transducer is a high accuracy strain gauge load cell, for push and pull force measurement.
High accuracy of ±0.05% tolerance, sensor the range from 10N ~ 20KN, widely used in all kind of weighing and force measuring industries, suitable to connect with load cell amplifier or strain gague amplifier. |
Specifications
| Model | Rating capacity | φA | B | C | φD | φE | F | G | H | I | mass |
| (kg) | |||||||||||
| LRM-20N | 20N | 52 | 45 | 38 | 47 | 12 | M6P1 Depth 8 | M6P1 Depth 6 | 38 | M4 Depth 6 | 0.26 |
| LRM-50N | 50N | 52 | 45 | 38 | 47 | 12 | M6P1 Depth 8 | M6P1 Depth 6 | 38 | M4 Depth 6 | 0.26 |
| LRM-100N | 100N | 63 | 60 | 55 | 55 | 20 | M10P1.5 Depth 15 | M10P1.5 Depth 15 | 40 | M5 Depth 10 | 0.95 |
| LRM-200N | 200N | 63 | 60 | 55 | 55 | 20 | M10P1.5 Depth 15 | M10P1.5 Depth 15 | 40 | M5 Depth 10 | 0.95 |
| LRM-500N | 500N | 63 | 60 | 55 | 55 | 20 | M10P1.5 Depth 15 | M10P1.5 Depth 15 | 40 | M5 Depth 10 | 0.95 |
| LRM-1KN | 1kN | 70 | 65 | 60 | 64 | 20 | M10P1.5 Depth 15 | M10P1.5 Depth 15 | 40 | M5 Depth 10 | 1.3 |
| LRM-2KN | 2kN | 70 | 65 | 60 | 64 | 20 | M10P1.5 Depth 15 | M10P1.5 Depth 15 | 40 | M5 Depth 10 | 1.3 |
| LRM-5KN | 5kN | 70 | 85 | 85 | 60 | - | M12P1.75 Depth 15 | M12P1.75 Depth 15 | 40 | M5 Depth 10 | 1.7 |
| LRM-10KN | 10kN | 88 | 110 | 110 | 80 | - | M18P1.5 Depth 22 | M18P1.5 Depth 22 | 60 | M8 Depth 12 | 3.5 |
| LRM-20KN | 20kN | 98 | 110 | 110 | 90 | - | M18P1.5 Depth 22 | M18P1.5 Depth 22 | 60 | M8 Depth 12 | 4.5 |
| Rated Capacity | 10KN~20KN |
| Rated Output | 2mV/V±1%(10N-50N is 1m/V/V,100N is 1.5mV/V |
| Non-Linearity | 0.05% R.O. |
| Hysteresis | 0.05% R.O. |
| Repeatability | 0.05% R.O. |
| Recommended Input Voltage | 10V(10N~50N is 5V) |
| Maximum Input Voltage | 18V(10N~50N is 10V) |
| Input / Output Resistance | 350Ω±1% |
| Insulation Resistance | 2000MΩ以上 |
| Compensated Temperature Range | -10~+70℃ |
| Operating Temperature Range | -20~+100℃ |
| Temperature Effect on Zero Balance | ±0.01%R.O./℃ |
| Temperature Effect on Rated Output | ±0.01%/℃ |
| Safe Overload Rating | 120%R.C. |
| Cable | ∮6、4-conductor shielded cable 3m long |
| 5KN or more, length 3m |
Calculate your shipping cost by country/region and quantity.
| Shipping Company | Shipping Cost | Estimated Delivery Time |
|---|
| Accepted payment method | Currency |
|---|---|
|
TWD , USD |
